
Frac-out in horizontal drilling: how to prevent inadvertent fluid returns
A frac-out can stop an HDD crossing and trigger environmental penalties. Learn why it happens and how to prevent it with sound fluid design and monitoring.
Practical guides written by our team to solve the problems that cost industry the most.

A frac-out can stop an HDD crossing and trigger environmental penalties. Learn why it happens and how to prevent it with sound fluid design and monitoring.

Prepare metal surfaces to a cleanliness comparable to abrasive blasting, with no sand, no dust and no shutdown. Discover the alternative.

Bentonite or polymers: learn how to choose the HDD drilling fluid for each soil type and avoid stuck pipe, collapses and cost overruns.

Learn the causes of stuck pipe in horizontal directional drilling (HDD) and the practices that prevent lost tools and cost overruns.

What is an anchor profile and what do Sa 2½ or SSPC-SP 10 mean? A practical guide so your anticorrosive coating does not fail early.

Remove corrosion and prepare surfaces in classified areas without plant shutdowns, using ATEX-certified pneumatic tools and no abrasives.

Find out what causes internal corrosion in pipes and pipelines, how to detect it in time and which strategies prevent leaks, spills and unplanned shutdowns.

Learn about the types of pigs for cleaning, gauging and product separation in pipelines, and how to choose the right one to fight internal corrosion.

Isolate pipe sections with high-pressure plugs to repair, replace valves or test welds without depressurizing the entire line. See how it works.

Flange leaks cost production, safety and environmental fines. Learn their 7 most common causes and the solutions to seal them for good.

Tape, paste or thermo-reactive sealant: learn how to choose the right thread sealant for high pressure, temperature and chemicals, and avoid recurring leaks.

Corrosion in flanges and bolts loosens joints and causes leaks. Discover how Flange Saver type VCI protectors prevent damage for up to four years.

Restore the strength of pipes with wall loss without welding or shutting down the line. This is how carbon fiber repair under ASME PCC-2 works.

Leaks and corrosion are major causes of non-productive time (NPT) in Oil & Gas. Learn how to measure, prioritize and reduce it with an integrity program.

Carbon fiber, fiberglass, clamp or welding? Compare methods for repairing pipe leaks by pressure, time, cost and safety.

Corrosion under tank bottoms goes unseen until there is a leak. Discover how VCI inhibitors protect bottom plates in service or out of service.

Humidity, salt and heat accelerate atmospheric corrosion in Colombia. Learn how to preserve equipment and spares outdoors and indoors with VCI technology.

A new or idle pipeline corrodes too. Learn how to preserve uncommissioned, stockpiled or out-of-service pipes with VCI inhibitors.
There are no articles in this category yet.