Thread sealant for high pressure and temperature: how to choose the right one
2 min readRoyal Integrity technical team

Threaded joints are everywhere: instrumentation, vents, drains, equipment connections and utility lines. Because they are “small”, they are underestimated. But a poorly sealed thread in steam, gas or chemical service can become a dangerous leak that is hard to control.
Why threads leak
A tapered thread (such as NPT) seals by metal-to-metal interference, but between the threads there is always a spiral path the fluid can travel through. The sealant must fill that space and remain stable under pressure, temperature, vibration and the fluid.
Sealing options and their limits
| Option | Advantage | Limit |
|---|---|---|
| PTFE (Teflon) tape | Economical and clean | It can shift, degrades at high temperature and leaves fragments in the system |
| Conventional sealing paste | Easy to apply | Limited temperature and chemical range |
| Thread compound with PTFE | Seals and lubricates | Must be compatible with the fluid |
| High-temperature thermo-reactive sealant | Expands with heat and fills imperfections | Needs heat to cure completely |
How to choose: 5 questions
- What is the maximum temperature, including peaks?
- What are the operating and test pressures?
- What fluid does it carry: steam, hydrocarbon, acid, oxygen?
- Is there vibration or thermal cycling?
- Will the joint need to be disassembled in the future?
Deacon sealants and Jet-Lube compounds
For severe service, Deacon sealants are formulated as thermo-reactive compounds: with heat they form a mechanical seal that withstands pressure, temperature and chemicals, and they also serve as gasket dressings and flange sealants. Jet-Lube, for its part, has for decades manufactured thread compounds, anti-seize products and lubricants for the oil industry. Each product has its temperature range and compatibility on its technical data sheet, which should always be checked before application.
Good application practices
- Clean the threads of oil, rust and old sealant residue.
- Apply the compound to the male threads, leaving the first thread clear.
- Tighten according to the practice for the size and material.
- Respect the curing time before pressurizing when the product requires it.
Royal Integrity advises you
Royal Integrity distributes Jet-Lube and Deacon sealants in Colombia and helps you select the product according to pressure, temperature and fluid, with field technical support.
Frequently asked questions
Does Teflon tape work for steam? At low pressure it may work, but for steam and high temperature a sealant designed for that service is recommended.
What is an anti-seize compound? A compound that keeps threads from seizing or “welding” together through heat and corrosion, making disassembly easier.
Can I combine tape and paste? It is not a recommended practice; choose a single system suited to the service.
Need the right sealant for your service? Schedule a technical consultation.



