Royal Integrity MPY 0.0075

Flange and bolt corrosion: how to protect them with VCI inhibitors

Comparison of a rusted flange and a repaired, protected flange

The flange is one of the most vulnerable points in a piping system. Between its faces, in the stud threads and under the nuts, moisture, salt and contaminants build up where paint cannot protect. The result: bolts that lose cross-section, joints that loosen and leaks that appear without warning.

Why flanges corrode more

  • Crevice corrosion: the narrow gap between the flange faces retains moisture and oxygen.
  • Complex geometry: bolts, nuts and edges are hard to coat well.
  • Aggressive environments: coastal areas, platforms, plants with H₂S or SO₂.
  • Frequent maintenance: every time the joint is disassembled, the coating is damaged.

Consequences

Corrosion can change bolt tension and cause gaskets to lose load and fail. Corroded bolts also become a problem at disassembly: they have to be cut, which lengthens shutdowns.

The VCI solution: Flange Saver

Zerust Flange Saver® protectors wrap around the flange and are impregnated with volatile corrosion inhibitors (VCI). The inhibitor vapor fills the joint space and forms a protective molecular layer on bolts, nuts and faces, even where paint does not reach. According to Zerust, they offer up to four years of protection, are easy to install and replace, and their vapors are non-toxic. Petrobras incorporated them into its technical specifications for flange corrosion.

Advantages over traditional methods

MethodLimitationWith Flange Saver
PaintDoes not reach crevices or threadsThe vapor protects all internal surfaces
GreaseAttracts dirt, washes off, makes a messClean, removable installation
TapeCan trap moistureActive barrier against corrosion

Recognized experience

Royal Integrity’s track record includes two international awards, from Petrobras and NACE 2012, for corrosion solutions applied to flanges and storage tanks.

Royal Integrity: VCI corrosion control and passivation

As a distributor of Zerust – Excor, Royal Integrity implements flange protectors and VCI solutions for assets in operation and in storage, with a survey of critical flanges, installation and after-sales follow-up.

Frequently asked questions

What is a Flange Saver? A flange protector impregnated with volatile corrosion inhibitors that protects the bolts, nuts and faces of the joint.

Does the flange have to be disassembled to install it? No, it is installed around the existing joint.

Does it work on offshore platforms? Yes, it is designed for aggressive environments such as platforms, refineries and chemical plants.

Want to protect your critical flanges? Schedule a technical consultation.

Related articles

Blog

Keep reading

View all articles
Schedule a technical consultation