Royal Integrity MPY 0.0075

Surface preparation in explosive atmospheres: maintenance without shutting down the plant (ATEX)

MontiPower surface preparation tool kit for ATEX zones

In refineries, compressor stations, platforms and petrochemical plants, corrosion does not wait for the next scheduled turnaround. The problem is that many surface preparation methods generate sparks or heat, or require equipment that cannot operate near flammable gases. The result: postponed repairs and advancing corrosion.

What is an explosive atmosphere?

It is an area where flammable gases, vapors or dusts may be present in a concentration high enough to ignite. The European ATEX directive and zone classification define which equipment may operate there:

  • Zone 0: explosive atmosphere present continuously.
  • Zone 1: likely during normal operation.
  • Zone 2: unlikely and only for short periods.

Why conventional preparation is a risk

  • Conventional electric discs and grinders can generate sparks and ignition sources.
  • Abrasive blasting generates static electricity and needs large equipment.
  • Any work with ignition potential requires hot work permits, continuous gas monitoring and, sometimes, depressurizing or isolating equipment.

The alternative: ATEX-certified pneumatic tools

MontiPower’s pneumatic Bristle Blaster® is ATEX certified for zone 1 (Ex II 2G). With no loose abrasive and no electric motor in the tool, it makes it possible to remove corrosion and create an anchor profile in classified areas, always within each facility’s permit system and risk analysis.

Benefits for operations

  1. Less NPT: spot repairs without waiting for the general turnaround.
  2. Less logistics: one portable tool versus a full sandblasting setup.
  3. Less exposure: no silica dust and no tons of waste.
  4. Better coating: cleanliness comparable to Sa 2½ with an anchor profile, according to the manufacturer.

Typical applications

  • Paint touch-ups on process piping and racks.
  • Preparation of flanges, supports and areas of corrosion under supports.
  • Maintenance on platform and vessel decks.
  • Repairs prior to carbon fiber or fiberglass wraps.

How Royal Integrity implements it

Royal Integrity distributes MontiPower equipment in Colombia with ATEX certification for zones 1 and 2, and supports implementation: equipment selection, operator training and field technical support, under the highest OHS and environmental standards.

Frequently asked questions

Can I use the Bristle Blaster without a work permit? No. Each facility defines its permits; ATEX certification makes approval easier, it does not replace it.

Which version is suitable for classified areas? The ATEX-certified pneumatic version.

Can it be used to prepare for a carbon fiber repair? Yes, surface preparation is a key step in every composite repair.

Do you have corrosion in areas you cannot shut down? Schedule a technical consultation.

Related articles

Blog

Keep reading

View all articles
Schedule a technical consultation